huotop的部落格

Measurement of the optical system with supervision and management measures Wikipedia card Administration of Quality Supervision, Inspection and Quarantine Order No. 54 "optical system with measurement supervision and management approach" has been September 28, 2003 General Administration of Quality Supervision, Inspection and Quarantine Bureau of Works meeting examined and adopted, is hereby announced that since December 1, 2003 into effect. Secretary Li Changjiang 二 ○ ○ 三年 十月 十五 日

directory

optical system with metering supervision and management measures Article Article Article Article Article Article Article Article Article Article IX spectacle unfold Edit this paragraph measurement system with supervision and management measures to strengthen the first measurement of the optical system with supervision and management, standardize the measurement of the optical system with behavior, to protect consumer health and personal safety, according to "Measurement Law" and the State Department to give national General Administration of Quality Supervision, Inspection and Quarantine of the duties to develop this approach. Article in the PRC engaged in the optical system with quantifiable activities and related metrological supervision and management, you must comply with these measures. The term refers to the optical system with units or individuals engaged in eyeglass lenses, contact lenses, glasses, finished production, sales and optometry, set of glasses,2013 Football Boots Soccer Cleats ShoesNike Mercurial Vapor VII Superfly III TRX FG Cleats 2012 Silver Pink Black , contact lens wearers and other business activities. The term includes pretend finished spectacle glasses, sunglasses and so on. The term refers to the use of optometry optometry equipment, measuring and testing equipment for consumers to measure the refractive state of the eye, analyze and issue prescriptions activity. Article III of Quality Supervision, Inspection and Quarantine of the national optical system with measurement exercise unified supervision and management. Above the county level quality and technology supervision department of the administrative area of ​​the optical system with metrological work supervision and management. Optical system with Article shall comply with the following provisions: (a) measuring compliance with laws, rules and regulations, the development of the measurement of the optical system with the management and protection of consumer rights system, improve the measurement assurance system, according to quality and technical supervision departments to accept metrological supervision. (Two) to comply with professional staff provides market access system with metered business knowledge training qualified to obtain appropriate professional qualifications specifically (and) the measurement management and professional and technical personnel responsible for the measurement of the optical system with the work. (Three) equipped with measuring instruments shall have the measurement equipment manufacturing license logo, number, product certification; imported measuring instruments shall comply with the "People's Republic of imported measurement instruments supervision and management measures" the relevant provisions. (Four) belonging to the mandatory verification of measuring instruments must be inventoried in accordance with regulations at the local county level quality and technology supervision departments for the record, and to their designated metrology institutes for periodic verification. Not be done locally, up a quality and technology supervision department designated metrology institutes for periodic verification. (Five) may not be used without the test, over test cycle or certificated unqualified measuring instruments. (Six) shall not use legal measures, the State provides for the repeal shall not use non-statutory units of measurement instruments and the State Department ban on the use of other measuring instruments. (Seven) for verification of measuring instruments shall be approved by the competent authorities in accordance with the price and charges to pay the costs. Article eyeglass lenses,2013 Football Boots Soccer Cleats Shoes Nike MercurialNike Mercurial Vapor VIII IC Indoor White Blue , contact lenses, and finished glasses producer addition to complying with the provisions of Article IV of this approach, it should comply with the following provisions: (a) compatible with the production vertex, permeability and thickness measurement testing equipment. (Two) to ensure the data issued by the accurate and reliable measurement of optical products. Article eyeglass lenses, contact lenses, glasses, sellers, and finished in optometry, set of glasses, contact lens wearers addition to complying with the operators of the provisions of Article IV of this approach, it should comply with the following provisions: (a ) establish a perfect measuring and testing incoming and outgoing goods inspection system. (Two) equipped with sales, operations compatible optometry, IPD, vertex, transmittance, thickness measuring and testing equipment. (Three) in contact lens wearers operators should also be equipped with compatible operating ophthalmic measuring and testing equipment. (Four) guarantee issued by the data is accurate and reliable measurement of optical products. Article VII of quality and technology supervision departments at all levels of supervision and management when performing measurement shall comply with the following provisions: (a) publicity metering laws, rules and regulations, and urge those who comply with the optical system with metering laws, regulations and relevant provisions of the optical system with good measurement of supervision and management. (Two) of the optical system with the use of measurement instruments and measurement activities related to supervision and management measures, investigate illegal measure. (Three) guided by the optical system with improved measurement assurance system and those who qualified to carry out the optical system with the provincial "price, reliable measurement" activities. (Four) measured accepting complaints, mediating disputes over measurement, organizational arbitration test. Article metrology institutes and metrology metrology personnel, shall comply with the following provisions: (a) in accordance with the verification procedures to complete the certification within the prescribed period, the certificate issued. (Two) may not be used without passing the examination or exceed the validity of the measurement standards to carry out verification work. (Three) may not be assigned without obtaining documents metrology staff members engaged in metrological verification work. (Four) are not allowed to adjust the test cycle. (Five) shall not falsify data. (Six) shall not exceed the standard fees. In violation of Article IX of the optical system with the relevant provisions of Article 4, shall be punished in accordance with the following provisions: (a) violation of the provisions of Article (three) items shall be ordered to correct and may impose a fine of 2,000 yuan . (Two) violation of the provisions of Article (four), article (five) provides that the use of compulsory verification of measuring instruments failing to register, at the local county level quality and technology supervision departments for the record, ordered to make corrections; Use subject to compulsory verification of measuring instruments, did not apply for certification in accordance with or exceed the test cycle to continue to use, shall be ordered to stop using, may impose a fine of 1,000 yuan; using compulsory verification of measuring instruments, the test failed to continue to use, and ordered Stop use and may impose a fine of 2,000 yuan; using a non-mandatory verification of measuring instruments, failing to regularly test and the test failed after continued use, shall be ordered to stop using, may impose a fine of 1,000 yuan. (Three) violation of the provisions of Article (six) provides that the use of non-statutory units of measurement, and ordered to make corrections; using State Council abolished statutory units of measurement instruments and the State Department ban on the use of other measuring instruments shall be ordered to stop use of measuring instruments and all confiscated illegal income and impose a fine of 2,000 yuan. Article eyeglass lenses, contact lenses, glasses finished product producers in violation of the relevant provisions of Article V, shall be punished in accordance with the following provisions: (a) violation of the provisions of Article 5 (a) provides that, shall be ordered to correct, may impose a 1,000 yuan to 10,000 yuan fine; refuse to correct, the circumstances are serious, the proposed industrial and commercial authorities to revoke its business license. (Two) violation of Article V (b) provides that, to make corrections, causes losses to consumers, and ordered damages, confiscation of all illegal income and impose a fine of 2,000 yuan. Article 11 eyeglass lenses, contact lenses, product sales, and engage in optometry glasses, set of glasses, contact lens wearers operators in violation of the relevant provisions of Article 6, shall be punished in accordance with the following provisions: (a ) violation of the provisions of Article VI (a) provides that, and ordered to make corrections. (Two) violation of the provisions of Article VI (b) shall be ordered to correct, may impose a 1,000 yuan to 10,000 yuan fine; refuse to correct, the circumstances are serious, the proposed industrial and commercial authorities to revoke its business license. (Three) violation of the provisions of Article VI (c) shall be ordered to correct and may impose a fine of 2,000 yuan. (Four) violation of the provisions of Article VI (four) items shall be ordered to correct damage caused to consumers, and ordered damages, confiscation of all illegal income and impose a fine of 2,000 yuan. Article XII of the optical system with violation of the provisions, refused to provide the optical system with the accounts, making illegal gains are difficult to calculate, according to the seriousness of offenses liable to a maximum fine of not more than 30,000 yuan. Article XIII in the optical measurement system with national staff supervision and management of abuse of power, dereliction of duty shall be given administrative sanctions; constitutes a crime, be held criminally responsible. Article XIV in the optical system with measuring instruments and metrology institutes accredited metrology personnel in violation of metering laws, regulations and these Regulations, in accordance with the relevant laws and regulations measurement shall be punished. Article XV of the provisions of the administrative penalty, above the county level quality and technology supervision departments. Above the county level of quality and technical supervision departments to impose administrative penalties in accordance with this approach, it must comply with the National Quality Supervision, Inspection and Quarantine on administrative case handling procedures of the relevant provisions. Article XVI administrative relative person refuses to accept the administrative punishment, may apply for administrative reconsideration or bring an administrative lawsuit. Article 17 These Measures following terms mean: (a) optical system with those who are engaged in eyeglass lenses, contact lenses, glasses, finished production, sales and optometry, set of glasses, contact lens wearers and other business activities of the entity or individual. The term is producers, sellers and operators collectively. (Two) the producer is engaged in eyeglass lenses, glasses, contact lenses and finished production units or individuals. (Three) the seller is engaged in eyeglass lenses, contact lenses, glasses sales activities finished units or individuals. (Four) the operator is engaged in optometry, set of glasses, contact lens wear business activities of the entity or individual. Article 18 These Measures by the State General Administration of Quality Supervision, Inspection and Quarantine is responsible for interpretation. Article 19 These Measures since December 1, 2003 into effect. December 1, 2003, the State Administration of Quality Supervision issued the "optical system with metering supervision and management measures" will be officially implemented, in which the optical system with those put forward six requirements, offenders will be penalized up to $ 30,000. Provincial bureau has been deployed in the province will be carried out within the premises measuring optical system with special work, this work will continue into the first half. "Measures" proposed by the optical system with six measurement requirements that comply with metering laws, rules and regulations, the development of the measurement of the optical system with the management and protection of consumer rights system; shall be equipped with appropriate professional qualifications obtained specifically (and) Measurement management and professional staff and technical personnel; measuring instruments should have license logo, number, product certification, imported measuring instruments shall comply with the relevant regulations; mandatory verification of measuring instruments must be inventoried and reported to local quality supervision departments for the record and to measure institutes for periodic verification; may not be used without a test, or test failed over test cycle measuring instruments; may not use legal measures shall be used repealed statutory units of measurement shall be used repealed statutory units of measurement instruments and prohibit the use of other measuring instruments. "Measures" were in violation of the provisions of the optical system with persons and eyeglass lenses,2013 Football Boots Soccer Cleats Shoes Mercurial Victory 2012 II IC Gray Black Pink , contact lenses, glasses, producers and engage in the finished spectacle lenses, contact lenses, product sales and engage in optometry glasses, set of glasses, contact lenses with Dai operators were made specific penalties. For example, the use of compulsory verification of measuring instruments, did not apply for certification in accordance with or exceed the test cycle to continue to use, shall be ordered to stop using, and impose a fine of 1,000 yuan; refuses to provide the optical system with accounts so difficult to calculate the illegal income, according to the seriousness of offenses punishable by a maximum fine of $ 30,000.